Currently we are working on development of desktop filament extruder.
Our value to end customer will include 3 diameter related types of filaments (ABS, PLA, HIPS and PVA): 1.75, 2.85 and 3.00 mm and preliminary cost for end customer to make own 1 kg spool will be at the level of $11 using high quality resin.
Our value to end customer will include 3 diameter related types of filaments (ABS, PLA, HIPS and PVA): 1.75, 2.85 and 3.00 mm and preliminary cost for end customer to make own 1 kg spool will be at the level of $11 using high quality resin.
Our desktop extruder will be released in
Days
Hours
Minutes
Seconds
Leave your e-mail to stay up to date
PRELIMINARY TECH SPECS:
Diameter tolerance: +/- 0.03 mm
Extrusion speed: Up to 10 ft/minute
Electrical usage: 200 W Average
Dimensions: 14" x 12" x 10"
Grinder: yes
Spooling: yes
Hopper Capacity: Expandable
Max Temp: All metal hot end for +400°C
Diameter: 1.75mm, 2.85mm, 3.00mm
Will be available with either 110 VAC or 220 VAC with appropriate mains plug for your region - arrives assembled, tested and primed with your choice of PLA, ABS PVA or HIPS.
Extrusion speed: Up to 10 ft/minute
Electrical usage: 200 W Average
Dimensions: 14" x 12" x 10"
Grinder: yes
Spooling: yes
Hopper Capacity: Expandable
Max Temp: All metal hot end for +400°C
Diameter: 1.75mm, 2.85mm, 3.00mm
Will be available with either 110 VAC or 220 VAC with appropriate mains plug for your region - arrives assembled, tested and primed with your choice of PLA, ABS PVA or HIPS.
We first had the idea for main extruder almost 2 years ago, but it wasn't until the fall of 2016 that we really started to test our ideas. No matter what we tried, we just couldn't get plastic to extrude reliably and consistently, until we discovered the best approach in the spring of 2017.